Myzone integrates with InBody 230, InBody 270, and InBody 570. You will also need to purchase a Raspberry Pi computer from Myzone. Read on for set-up instructions.
What Equipment do I Need?
Please contact your Myzone Account Manager to purchase the Raspberry Pi. You will aslo need:
- A power source for the Raspberry Pi and the scale.
- An ethernet cable to plug into your Raspberry Pi, either from a wall jack or your router. The Raspberry Pi only functions with a hardwired connection. WiFi will not work.
- You will receive: Raspberry Pi, a USB serial adapter cable, a gender changer adapter for proper scale fit, and a power cable.
You will receive set up instructions for your Raspberry Pi once it arrives. Refer to InBody's instructions to operate your scale.
Setting Up the InBody with Myzone
After measurements are taken, the scale will print out a results sheet with a QR code. Members will scan the code in the Myzone app to instantly upload results.
QR Code Integration for InBody Versions: 270, 370S, 570, 770
The QR Code integration requires one of the following firmware versions:
To check the firmware version, enter the Administrator menu on the device, and tap the number as shown below. The firmware revision will be displayed at the bottom of the menu.
If the scale does not use supported firmware, contact InBody to discuss a firmware upgrade.
Next, set the device up to print the QR code on the results sheet.
- Access the Administrator menu
- Select option 13. Outputs/Interpretations for Results Sheets
- Select InBody Results Sheet.
- Select QR Code Output to include the QR code on the results sheet.
- Note the Free Space number. This is the amount space available for data on the results sheet. You may need to edit some options to include the QR Code.
- Press Save then Exit to return to the Home screen.
Data Management Package 3.1.1.0
If you are using InBody’s data management package on revision 3.1.1.0 or above, you can print via the application rather than the device. Enter the Setup located at the top right-hand corner of the software, then select 10. Program and Computer Information/Update History.
The program information is in the top left area of the screen. This must be program version 3.1.1.0 or greater. If it is not, please contact InBody for an updated version if you are interested in this feature.
To set the program to print QR codes on the results sheets:
- From the home screen, enter Setup
- under the ‘InBody Test Settings’ category, select option 03. Output/Interpretations for Results Sheets.
- Note the Free Space number which tells you how much room you have for data on the results sheet. You may need to edit your fields to make space for the QR code.
- Select QR Code Output.
- Press Save then Exit to return to the Home screen.
